9 kHz – 50 MHz
Active Loop Antenna
EM-6869

The EM Antennas EM-6869 Active Loop Antenna is used with any receiver or spectrum analyzer with 50 ohm input and covers the frequency range of 9 kHz to 50 MHz.

Data Sheet

Details:

The EM Antennas EM-6869 Active Loop Antenna is used with any receiver or spectrum analyzer with 50 ohm input and covers the frequency range of 9 kHz to 50 MHz.

The internal active circuitry equalizes the frequency response of the EM-6869 loop antenna yielding a relatively constant antenna factor across the 9 kHz to 50 MHz range.

Electrical

Frequency Range: 9 kHz – 50 MHz

Dynamic Range: 85 dB at 10 kHz
125 dB at 1 MHz

Sensitivity: 50 dB (µV/m) at 10 kHz
-1dB (µA/m) at 10 kHz
10 dB (µV/m) at 1 MHz
-41dB (µA/m) at 1 MHz
(at 200 Hz Bandwidth and average detector function on receiver)

1dB Compression point: 5V/m, 13mA/m
Impedance: 50 Ohms, nominal
Connector: Type SMA (Jack)
External Power Source: 12 V.D.C. (Required)

Mechanical

Length: 13 1/8” (33.3 cm)
Width: 16 11/16” (42.39 cm)
Diameter: 12” x 16” (30.5 cm x 40.6 cm)
Depth: ¾” (0.29 cm)
Weight: 1.55 lb. (0.70 kg)
Optional external battery pack available.